The most obvious type of marking, which is mainly used in suburban roads, is single-component or cold traffic marking, which can be implemented with a width of 20 or 15 or 12 cm and a thickness of 700 microns for wet film and 380 microns for dry film. It has an experienced and capable staff and equipped machines in the field of implementing the cold traffic line as well as producing this type of paint ready to serve all government and private organizations
The traffic hot line can be applied in 3 different ways, the most common of which is the spray hot line with a thickness of 1500 microns and a shelf life of 18 months and 50%. In the second method, the hot screed line with a thickness of 3000 microns and a shelf life of 36 months is 50%, and in the third method, a hot extrusion line with a thickness of 3000 microns and a shelf life of 36 months is 50%, which is often used as horizontal warnings on the side of roads. This company is ready to serve all public and private organizations by using German Hoffman traffic hotline machines
The implementation of traffic patterns using two-component and three-component colors (suitable to the environment climate) is used in order to better guide the riders of vehicles, the most common patterns can be direction arrows near ramps and loops and near roundabouts. or school words or caution or triangle motifs or speed limit circles in the required places. This company uses experienced and expert staff in the field of implementation with the instructions of competent organizations and also produces suitable colors with excellent quality ready to serve All public and private organizations
One of the most effective and least expensive horizontal warning signs in urban and suburban roads, which are mostly implemented on the side of the road (on the centerline or in its vicinity) and prevent vehicle riders from falling asleep, is the longitudinal vibrating grooves that are The length of the road and with different widths depending on the request of the employer and the environmental conditions can be implemented from 15 cm to 35 cm and the depth of 6 to 9 mm. This company serves government and private organizations with an experienced and expert staff in the field of implementation, as well as suitable and ready-to-use machines
It is one of the most effective and least expensive horizontal warning signs in urban and suburban roads, which are implemented across high-risk roads or accident-prone areas according to the employer's order and with a depth of 6 to 9 mm. It also controls and slows down. This company serves government and private organizations with an experienced and expert staff in the field of implementation, as well as suitable and ready-to-use machines
The cuts across the road and with a special order (instructions of the Road and Road Transport Organization) which are implemented according to the order of the employer in the accident-prone parts of the roads with a width of 15 to 30 cm and a depth of 6 to 9 mm and It is one of the most common warnings and speed reducers. This company serves government and private organizations with an experienced and expert staff in the field of implementation, as well as suitable and ready-to-use machines
As you can see, there are still old traffic lines left in many urban and suburban roads that have undergone geometric corrections or changes in direction, which are very dangerous and cause drivers to go astray and deviate during the hours of darkness. In the past, black paint or primer was used to remove these lines, and after the passage of time and the loss of the covering layer, the old line becomes visible. With the help of experienced engineers and industrial designers, this company has succeeded in building traffic lane removal devices with high work efficiency, which in addition to eliminating all traffic lanes such as cold, hot and two-component, does not cause any damage to the road bed. This device allows the operator to have the best efficiency in the use of time with the ability to move quickly
Diba Omran Tahtar company aims to build and develop our beloved Iran by presenting new designs and with a new look at the process of detecting danger in urban and intercity communication axes, marking roads, lighting tunnels and roads, production and implementation of all traffic signs and construction Traffic control and road safety machines, which help to reduce injuries and damages and traffic, started their activity